People of Velocity

Dan Maher Alan Shaw David Lee Neil Hunter Carl Pescarrell Duane Swing
Bonnie Swing Scott Swing Jean Prudhomme Mark Machado Nancy Machado
Scott Baker Brendan O'Riordan Nathan Rigaud Ken Baker Dan Anderson
John Abraham Don Hauck Granger Whitelaw

Danny Maher

Danny J Maher - Founder/Designer/President 1984-1992

(excerpted from Sport Aviation 1985/1986)
Danny J Maher grew up in Ft. Lauderdale, Florida, and went on to earn a Chemical Engineering degree. He worked in shipping, in electrolysis prevention, but began a hobby of racing boats. At 25 he had built a 32' ocean racer powered by a straight-drive Chevy V8 427 that would do 55MPH. This lead to a business in building offshore racing boats. This business was very successful, and after a decade he sold the company and "retired" at 35 to Sebastian.

Danny then bought and built an Ultralight (Wizard) and taught himself to fly (suffering a crash). During a visit to Merritt Island Airport, he admired the Long-ez of Neil Hunter, who's "Big-EZ" was a cover plane for Sport Aviation in Jaunary 1986. Wanting to buy one, this is when he first heard about "homebuilding" and the EAA. Danny became enamored with the long-ez, and built 2! The first was done in 10 months, the second was a test-bed for his ideas. He wanted to make the plane more comfortable, with more space, and more upright seating.

Danny Maher founded Velocity in 1984 in Sebastian, Florida with Danny as President. Pete Hoffman was the Vice President, and Neil Hunter was in charge of Public Relations. The prototype was built in 7 months, and first flew in the summer of 1985. It weighed 1,100 pounds empty, with a gross weight of 2,550 pounds and a Lycoming 180 HP engine and composite prop (built by Danny). Cruise was claimed as 220 MPH. Flight testing of the prototype was completed in mid-October 1985, and thus did not attend Osh Kosh (Airventure), but was debuted at Sun-n-Fun in 1986. That first airplane, with a serial number of DMO40, was registered as N401DM. This airplane was flown by Billy Henederson of Sport Aviation, who noted 1500-200fpm climb rates and a top end of 184 kts. This first aircraft also featured a retractable nose gear. Note that the original aircraft did not have full-length rudders.

The serial numbers started with DMO-Dan Maher Original, number 40. It's believed that the number 40 was chosen to reassure buyers that they were getting a proven product! The aileron push-pull cables were Morse marine style, because he was familiar with thier operation. The brake master cylinders were from the Datsun/Nissan B210's clutch! Build time was estimated at 800-1000 hours with the kit in the $18,000 range. The kit featured 43 1/2" wide fuselage, though the prototype was only 42 1/4". Similarly the height was 40" on the prototype, 41" on the kit, and length wsa 81". The main wing area on the prototype was 96.4 SQFT and the canard was 19.75 SQFT, for a total area of 116.15 SQFT, for a gross loading of 19.37 lbs/SQFT. These were increased slightly for the kits. The outer wing panels were modified Long-EZ airfoils, but the strakes and canard were Danny's design, and Roncz vortilons were added to the main wings. Danny is the registered builder of 4 velocitys (DMO040, DMO100, DMO255, and 029; N401DM, N7044Q, N255DM, and N4253M registration).

Alan Shaw - Original Partner 1986-post 1995

Alan had been working in wind surfer designs in the mid-1980s, and became Danny's partner in the original company, with a 10% share of the company, and was the brain trust for the molds. Danny had seen the molds Alan was working on for the "Sea Shark". Ted Yon, EAA since 1954, senior aerospace engineer, played the most important role advising on rigging and structures. Ted, who is now also a FAA designated engineer, did the span loading and resulting spar cap lay-up calculations as well as our Wiffle Tree design. At some point, Alan started the Dynamic Wing Company to build fast-build wings for builders, selling over 180 sets. John Fleming and Malcolm Collier were original employees of "Dynamic Wing" company. Alan is the registered builder of velocity DMO0085 (N8101S registration).

David Lee - Original Production Manager 1986-??

David Lee was the original production manager, and is the registered builder of 2 velocitys (DMO042 and DMO043, N80VA and N81VA registration).

Neil Hunter - Original Public Rleations Manager 1986-??

Neil Hunter was a retired USAF pilot who built a Long-EZ and flew it to Brazil and back (Sport Aviation January 1986), a larger "Big-EZ". Both of these aircraft were sold to AeroMet in Tulsa to be converted to UAVs. Neil's Velocity was built in 8 months (July 1986-September 1987). First flight was at Merritt Island Airport, Florida, in February 1988. It was fitted with a Great American propeller, originally a 66x76" but was changed for a 62x76" for better static RPM. Neil's was the first airplane to feature the nose oil cooler/flap design for heating. It weighed 1,150 lbs empty, and the ailerons were 3" longer.

Tragically, Neil was fatally injured on 24 October 1992 in a wake-turblulence encounter near Orlando, where his Velocity became inverted and could not be recovered (Sport Aviation December 1992).

Carl Pescarrell - Original Test Pilot ??-??

Carl Pescarrell was the first test pilot for Velocity. He had been a naval aviator, formation flying instructor, and airline capitan, and test pilot for Swearingen with over 17,000 flight hours. He was running a spin-training business out of the St. Augustine airport.

He came in and worked the original deep stall issue after Neil Hunter's first incident into a canal. Carl replicated the issue with the cg near the aft limit (cg range was 114.09 to 120.5), and though he was wearing a chute, decided to stay with the airplane after noticing how low the descent rate was (after opening the canopy), and landed unhurt off of St. Augustine. For future test flights, Jim Patton (former Chief of Flight Operations for NASA) was retained, and a moveable 210 lbs weight was installed in the copilot floor (excerpted from Sport Aviation July 1991).

Duane Swing - CEO 2008-Current (Owner 1992-2008)

See Duane's autobiography here. Started "homebuilding" with a Q2 that first flew in 1983, while his son Soctt was completing a Master's degree, in their Dayton garage/shop. Around 1987 he bought a previously owned (but not started) Glassair, which was sold to a friend shortly after completion, and their first Velocity was started shortly thereafter. This first Velocity was completed in 1988, on which they developed the retract system that they marketed as Tri-Q Development. It was first displayed at Osh Kosh in 1988, shipments started after Osh Kosh 1989. Sadly, the first aircraft was destroyed by fire days from first flight. To support the RG business, they started their second Velocity right away, and it was completed in August 1989 (N125V), and was the first retract.

This led to a "builder's assistance" program, which was based at the airport at Phillipsburg Ohio, which they bought. The facility would allow three planes to be worked on simulatenously, and seven aircraft were completed before closing the business and moving to Sebastian. In July of 1992, Danny and Duane entered negotations to sell Velocity to the Swings. Duane and Scott bought even (45%, since Alan Shaw owned 10%) shares of the company. Danny stayed on as a consultant for a short period of time. Duane announced his intention to sell his stake in 2002.

Bonnie Swing -

Bonnie Swing.

Scott Swing - Vice President of Product Development/Director of Veloicty Service Center 2008-current

Scott Swing got his PPT in 1980, and started a Master's degree from Wright State University in 1981. That summer he and Duane decided to build a Quickie 2 at Osh Kosh. After completing his degree, he took a job at Quickie in Mojave. He sold the Q2 to buy his share of the family's first Velocity. Scott was a co-owner and vice president from 1992 until the Rocket Racing Composite Corporation purchased Velocity in April of 2008.

Jean Prudhomme

Jean Prudhomme apparently ran a builder's assistance program (I can't find any direct documentation of that), and is the registered builder on 3 Velocityx (DMO230, 3RX002, 3RX053 registered as N242JP, N140JP, and N274JP). I'm told that he was instrumental in the design of the XL variant of the Velocity, but that an aeronautical engineer was brought in later to deal with some issues. (This per a conversation in Sebastian with an engineer who was involved with the failed Orion venture in Hamilton, OH that was going to build aircraft very similar to the velocity - the gentlemen's name escapes right now).

Mark Machado - Owner Velocity West 1995-1999 - Production Manager 2000-2001

Mark got his PPT in 1982, and bought Long-EZ plans in the 1984. Mark then bought a pair of highly modified aircraft, a Long-EZ and a Vari-EZ, in Nova Scotia and reworked them and got them flying.

Mark Machado bought his first Velocity kit in 1990, but was not started until 1992. First Flight on N131MM, his first Velocity, was on 1 April 1994. Later he decided to open a builder's assistance center, called Composite Aero. This facility later became a licensed sales entity, Velocity West, at Lincoln Memorial Airport near Sacramento in 1995. One of the demonstration aircrft built at West was equipped with a V8 automotive engine. In April of 1998, they hired Scott Baker to be their staff CFI (see Scott Baker). In 2000, the Machados became shareholders in the company and moved to Sebastian, but leave a year later (unexpectedly). By the time they moved to Sebastian, Mark had built 5 aircraft. Mark is the registered builder on 2 Velocitys (N642JM and N131MM). While at Sebastian, Mark filled the role of Production Manager.

Nancy Machado

Nancy Machado is Mark's wife, and as a full partner, helping to build and answer builder's questions. She appears to have filled the role of Event Coordinator and Sales Manager while in Sebastian.

Scott Baker - President of Velocity Aircraft/Director of Manufacturing

Scott started out with the Machado's at Velocity West/Composite Aero in April of 1998. According to the Velocity Views, he started out as their flight instructor. When the Machados closed Velocity West to move to Sebastian, he opened Seirra Bravo to continue assisting Velocity Builders. A few months after the Velocity Service Center was opened, Scott moved to Sebastian to manage it. Scott has held a variety of titles through his many years at Velocity, but the majority of his time has been spent as Production Manager.

Brendan O'Riordan - Test Pilot/Trainer pre2000-December 2005?

Brendan O'Riordan attended the University of Nebraska at Kearney, where he attained his fyling ratings and graduated from Utah State University in Logan Utah, where he received his A&P. He has been flying since 1990 with about 2300 hours logged to date. He holds both a CFII as well as an MEI ( multi-engine instructor). As a mechanic he has worked on planes from as small as 152's up to C-97's, DC-3's, C-130's and a couple other big radial and turbine airplanes that are used as firebombers. (BIO)

I couldn't find any in-print data on Brendan, so these are my personal recollections. Brendan came to the factory as a test/demo/instructor pilot, and was featured prominently in the "Introduction" video that came in the intro pack you could order. Mine came on VHS, the new ones are on DVD, so I don't know if it's exactly the same or not. Brendan was great, and was a fixture on the airshow circuit, talking about the airplane. In time, he became the force behind keeping the manuals up-to-date, and managed some of the website updates, KPCs, and wrote the ever popular "Shit tha Flys" column in the Velocity Views.

Those who knew him were shocked and concerned when he went down in "Bob1", where the Brazilian Wings were found to be incorrectly constructed (either the winglet spars were missing, or where not properly bonded to the wings if I recall correctly) and caused winglet flutter. But, he did a nice job getting her to the runway, and suffered only minor injuries when she rolled onto her roof. Brendan left Velocity because there were no chicks to score in Sebastian. Really.

Nathan Rignaud

Don Hauck - Vice President of Sales - April 2008-Current

email Don is a commercial multi-engine instrument pilot and the former Southwest Regional Sales Manager for Columbia Aircraft where his responsibilities include prospecting new leads through networking, contact with flight schools, referrals, and trade shows. Don earned the position of top salesman for 2006. Additionally, Don is a flight instructor, having received his CFI in 2000 and since then working in affiliated with Orange County Flight Center as flight instructor. In less than two years, Don earner the following certifications: Certified Flight Instructor (CFI), Certified Flight Instructor - Instrument (CFII), Multi-engine Instructor (MEI), Instrument Ground Instructor (IGI), and Advanced Ground Instructor (AGI). Previously, Don owned Western Printing, a midsize printing company in Newport Beach, California, specializing in small businesses printing.

Granger B. Whitelaw - Vice President of Sales - April 2008-Current

email Granger Whitelaw serves as President and Chief Executive Officer of the Rocket Racing League®, overseeing the league's management, operations, partnerships and corporate affairs.

Mr. Whitelaw is the Founding Partner and Managing Director of BlueCar Partners, LLC, a global venture-consulting firm that provides capital, strategic consulting and business development services to promote the growth and success of innovative companies. Over the past 15 years, Mr. Whitelaw has led the firm in the launch and expansion of more than 20 companies, including the AMBER Development Group which supports the next-generation of the Amber Alert system, International Fuel Technology, a fuel science and research company, GPS Industries, creator of GPS-related sporting equipment, Kalorama Studios, a major motion picture and event site in Washington, D.C., TrendSphere, a think tank and consultancy for Fortune 500 Chief Technology Officers, and Vemics, creator of breakthrough collaboration technologies. Previously, Mr. Whitelaw served as Vice President of Mergers & Acquisitions at Grady & Hatch.

Mr. Whitelaw studied International Trade & Marketing at the University of Minnesota.